Porsche 718 GT4 / GTS / Spyder Long Tube Race Headers (2020+)

The Fabspeed Long Tube Race Headers for the 718 4.0L cars deletes the factory catalytic converters and impressive power gains across the board. Our design process started with 3D scanning the entire exhaust system using our CREAFORM 700 HandySCAN so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After revisions for sound and dyno testing we settled on using 1 7/8 inch primary's compared to the smaller 1 3/4 inch factory primary's. The primaries are mandrel bent using CAD designed model that allows us to achieve the optimal primary length and bends for best flow and scavenging at the collector. The flanges are thick 304 stainless steel that are CAD designed to perfectly match the cylinder heads and reuse the factory metal gaskets.
SOUND:
With PSE off our Race Headers give a noticeable increase in exhaust volume with absolutely no interior drone. With PSE on, that's when the "Race" in Long Tube Race Header comes into play. The 4.0L's exhaust note sounds much closer to a Porsche GT3 Cup Car with that raw flat 6 sound and sharp deceleration crackle. If you need to cut down on how loud your exhaust is because of race track rules, we sell
turn down tips
which cut 3-6db of exhaust SPL.
POWER:
These headers will add more power than any other single bolt on part. Significant gains can be seen throughout the entire RPM band. On our DynoJet we saw +24 whp and 26 ft/lbs of tq at 7,700 RPM and strong torque gains down low with gains of +26 ft/lbs of tq at 2,600 RPM and 21 ft/lbs of tq at 4,600 RPM. This is power that you will feel in the seat of your pants all the way to redline.
FEATURES:
Fits all 718 Cayman/Boxster GT4 / GTS / Spyder Cars 2020+
Significant Dyno gains across the RPM band. +26 ft/lbs tq @ 2600 RPM, +21 ft/lbs tq @ 4600 RPM, and +24 whp @ 7700 RPM
Weight savings of 8lbs/3.6KG vs the factory exhaust
Large mandrel bent primary tubes
CAD designed merge collector for maximum possible flow
Constructed from high-quality 14-16ga CNC T304L stainless steel for maximum durability
Will trigger CEL (Check Engine Light) without a tune
Simple DIY bolt-on installation, no cutting or welding required
All Fabspeed performance products are backed by the
Fabspeed Lifetime Warranty
DISCLAIMER:
This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only, never to be driven on public roads. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.